Your pet’s new Walkin’ Wheels dog wheelchair comes with everything your pet needs to get up and walking again! 

Front Wheel Attachment 

• 1 set (2) Wheels and Struts 
• 2 Extenders 
• 1 set Leg Rings 
• Nuts, Bolts, and Allen Key 

A: Left and Right Extenders (2). These replace the extenders that originally came with your Walkin’ Wheels Rear wheelchair. The extenders will have a white label with “left front” or “right front.” Socket shoulder screws (4) should be on the outside of the wheelchair and are used to attach the leg rings. 

B: Legs (2). Silver struts (attached to C1 or C2) fit inside the wheelchair legs. The height can be adjusted by a push button on each strut. 

C1: Struts and 3” wheels (2). The caster adapters will be marked with a raised “L” or “R” to indicate which side they are installed on. This is VERY important. The raised L or R should face the inside of the wheelchair with you standing behind the wheelchair. or C2: Struts and 2” wheels (2). Struts come attached to 2” wheels for shorter dogs like Dachshunds. These are labeled “L” or “R” to indicate which side they are installed on. 

D: Front Leg Rings (1). You will not need to use the front harness that comes with the rear wheelchair. You will install the front leg rings instead, just like the rear leg rings. Leg rings should look like two Cs and not two Vs. The straps go over the frame; pull the black plastic clip over the socket shoulder screw and push upward. You will hear a click when it is locked into place. The dog’s front legs will go inside each ring to support his/her body in the front. To remove the leg rings, put your thumb on the circle and pull down. 

E: Bag of screws (1). Only for replacements, if needed. 

Walkin’ Wheels Rear Wheelchair 

• 1 Frame 
• 1 set of (2) Foam Wheels Attached to Struts 
• 1 set of Extenders 
• 2 connectors (7″ and 4″) 
• 1 Front Harness with Sleeves 
• 1 set Leg Rings Rear Support Saddle 
• 1 Belly Belt 
• 2 Stirrups 
• 1 Instruction Manual 
• 1 Tool kit 

Frame: 

The frame is blue, seafoam, or pink powder-coated aluminum. It will not bend, break, or rust. Black knuckles are on each side of the frame, which hold the leg of the wheelchair to the frame. The wheels/struts will be inserted into the leg and adjusted to the proper height. The knuckle has a high and low setting which can be adjusted with a Phillips screwdriver. 

Width Connectors: 

Your wheelchair will come with two width connectors (7″ and 4″). One is already installed in the back of your cart. If you need more width, the wheelchair comes equipped with a longer connector in the box. 

Length Extenders: 

Your wheelchair will come with two extenders (side rails) installed, which determine the length of your dog. The length of the extender should end in the middle of the dog’s front leg. It should not pass the front leg. 

The Front Harness 

The dog’s head goes between the blue and black straps. The red strap goes under the dog’s front legs and clips on the side of the harness. The shoulder pads are made of neoprene and keep the straps and buckles from causing discomfort for the dog. Neoprene comfort sleeves wrap around the straps for the dog’s comfort. Comfort sleeves can be cut in half if they are too long. 

 Leg Rings: 

The dog’s hindquarters are held in place by the leg rings, or our rear harness support system. The leg rings can also be used as a lifting harness when out of the wheelchair; the excess strapping can be touch-fastened together to make handles on each side. 

Wheels & Struts: 

The wheels are attached to a metal piece called a “strut.” Each wheelchairs comes with either 4″ or 8″ foam wheels, which are great for all terrains. They feature a dense foam interior with an outer rubber layer. These wheels will not puncture, wear extremely well, and are easy to clean. Your dog’s wheel size depends on your pet’s measurements. 

Belly Belt: 

The Belly Belt will help support your dog’s back. It is not always necessary to use the belly belt, but is highly recommended for dogs with a long back, overweight or elderly dogs, dogs with curvature of the spine, and dogs with disc problems. 

Stirrups 8″: 

Stirrups are used to hold the dog’s legs off the ground so they don’t drag due to paralysis, knuckling under, or foot injuries. The adjustable stirrups are positioned to hold the foot up at the hock. If your dog doesn’t need them, the stirrups may be removed from the wheelchair. 

 The Manual: 

The manual gives instructions and tips on assembling and using the Walkin’ Wheels Wheelchair. 

 Tool Kit: 

The tool kit comes in a plastic bag and includes an Allen wrench and set screws. The (optional) set screws may be used to tighten up the wheelchair frame and reduce flexibility, depending on your preference. 

Yes! In fact, your dog’s wheelchair is designed so that dogs can go to the bathroom and get the exercise they need. Not only can pets pee and poop while using their dog wheelchair, but their wheelchair also actually encourages them to go. A “down” dog tends to be less active, which can impact the internal functions of their body. Once a dog is in their wheelchair, they are standing upright and moving more which encourages their body to function correctly and allow them to relieve themselves naturally. 

How does it work? 

Both male and female pets can pee and poop freely while using their wheelchair. Their hind end is fully supported from underneath by their rear leg rings keeping them in a comfortable and natural standing position. Although your pet can not squat while in their wheelchair, they will relieve themselves while standing. 

https://youtu.be/IRj6SMqXnL4 

https://youtu.be/fCukendNcxc 

No. Our chair is designed NEVER to collapse on the dog’s leg or spine. We’ve gone to great lengths to be sure of it. The chairs are designed with the help of veterinarians and rehabilitation specialists to hold the dog up, keeping the spine and legs in the optimal position for safety and healing. 

What’s more, the purpose of the chair is to give the dog exercise and the freedom to go outside and do his business. When the dog is tired, you should never leave him in the chair. 

The reviews we have seen of the experimental sit-down spring-loaded style have not been positive. Although we have done a great deal of research, we have not found a safe way for a chair to collapse on a dog. 

No, your dog will not be able to lie down in a quad (full support/4-wheel) wheelchair.

Yes, the dog wheelchair will gives pets the support they need to stand, walk, and rebuild their strength. The wheelchair supports your dog to relieve pressure and reduce the weight placed on their legs making it easier for them to walk. We encourage your dog to use his/her rear legs to maintain muscle mass and to get exercise, while using their cart your pet will work to develop the muscle in the rear legs and build up their stamina as they exercise. A dog does not need to be fully paralyzed to benefit from using a dog wheelchair. If the rear legs are paralyzed, then the stirrups will keep their legs from dragging. 

https://youtu.be/3oQ8n1Sfni0 

It’s easy to determine the right size Walkin’ Wheels wheelchair for your pet. All you need is two simple measurements to choose the right size wheelchair for your pet: 

1. Measure the Rear Leg Height to the toe pad, ideally when your pet is laying down. Do not pull the leg tight; leave some natural bend. 
2. Your pet’s armpit to rump (ATR) measurement. To measure your pet’s length, measure from behind the front leg and across to the end of your dog’s body or rump. 

Click here to learn more 

Already have your dog’s rear leg height and body length measurement? Let our SureFit® Calculator help you find the perfect size wheelchair for your best friend! 

https://youtu.be/XGOqVbmG6-4 

We make every effort to ship within 48 hours of receiving the order. Shipping time can range from one to five business days. Express shipping options are also available.

• All orders over $49 USD ship free within the continental US and Canada.
• Orders typically ship within 48 hours.
• Overnight shipping is available.
• International shipping is also offered.
• Orders will be shipped from our East Coast or West Coast facility, depending on product stock availability.
• When selecting free ground transportation, we will choose the fastest option for you, using either UPS or USPS.
• If you need a guaranteed shipping time, please select from additional shipping options at checkout.
• Delivery is 1 to 5 business days for Walkin’ Wheels in the contiguous U.S. and Alaska.

Yes, the Walkin’ Wheels is very easy to transport. Simply turn the dial on the knuckle wheelchair to fold in the wheels and struts, making it easy to carry and travel with.

Every dog and disability are unique, so is their recovery process. We have seen varying degrees of rehabilitation with dogs using the wheelchair. Some dogs have been able to improve so much that they no longer needed the wheelchair. While your dog is in the wheelchair, they are getting physical therapy improving their physical and mental health.

It is our intention that every Walkin’ Wheels user be happy with their wheelchair. If you experience problems, please call us. Often we can help with a simple adjustment. Please click here for full return policy.